PMD-0531 PMD-221 PMD-371 PMD-421 PMD-581 PMD-641 PMD-643 PMD-1561
PMD-1563 PMD-2571 PMD-2573 PMD-4033 PMD-7533 PMD-15013A-E3
●High performance and energy saving
Compared to the conventional products, the pump efficiency increased by 35%.This type became smaller, lighter, 5-dB quieter and 50% reduction in vibration.
●Long-life and no liquid leakage
There is no liquid leakage due to no shaft seal part,As made of resin, this type is appropriate for transporting highly-corrosive special liquid.
●Complete no liquid leakage
This type is seal-less pumps based on the magnet coupling system. The pump section will never have liquid leakage, corrosion, dirt around the pump and troublesome mechanical seal replacement.
●Circulation of sea water,culture tank and water tank,etc.
●Drain chemical liquid,transfer of chemical liquid,etc.
●Waste water treatment equipment,Aquarium equipment,PCB equipment,Solar heating system,Filter,Bubble bath,Etching equipment,Printing equipment,Chillers,Cooling of NC machine,Ice maker,etc.
・Chemical resistance must be verified before using the products by checking whether an intended purpose can be achieved with a preliminary test,etc.
・In order to use cold water, apply lagging materials and/or heat-insulating materials as measures against dew condensation if necessary.
Corrosion resistance Table
|Sodium hypochlorite||Up to 5 ppm of concentration|
|Caustic soda||Up to 5% of concentration|
|Hydrochloric acid||Up to 30% of concentration|
|Sulfuric acid||Up to 10% of concentration|
|Citric acid||Up to 15% of concentration|
■The above corrosion resistance table shows the standards when a fluid temperature is normal (0 ～40℃)
Part name and material
Material of water contact part
|Part name||Classification 2|
|Pump shaft||Alumina ceramics|
|Thrust block||Alumina ceramics|