Get Adobe Flash player
Title-C
Centrifugal peripheric electric pumps - Cadobe-PDF
דף קטלוג להורדה
TYPEP1 (Kw)DNMATERIALSDIMENSIONS mm
3 phase
230/400V
1 phase
230V
50
HZ
2800
rpm
60
HZ
3300
rpm
CASINGIMPELLERSHAFTLBHdnmiech1
C34 24VD 0,15 1/4 CuZn CuZn AISI 420 189 63 90 90 50 40 25 60 80 45
C34 Cm34 0,22 0,3 1/4 CuZn CuZn AISI 420 203 110 145 100 90 44/75 25 60 86 56
CP34 CPm34 0,22 0,3 1/4 PPS PEEK AISI 420 203 110 145 100 90 44/75 25 61 86 56
C44 Cm44 0,75 1 3/8 CuZn CuZn AISI 420 247 120 170 120 100 80 30 81 100 63
C54 Cm54 0,8 0,9 3/4 CuZn CuZn AISI 420 252 120 170 123 100 80 40 83 105 63
C64 - 1,0 1,35 3/4 CuZn CuZn AISI 420 252 120 170 123 100 80 40 83 105 63
C74 Cm74 1,1 1,8 3/4 CuZn CuZn AISI 420 268 132 188 131 112 90 40 81 103 71
C84 Cm84 1,3 1,9 3/4 CuZn CuZn AISI 420 268 132 188 137 112 90 40 81 103 71
simaco-industry-C-draw
Characteristics
Continuous duty. 2 pole motor. Insulation class F. Protection IP 54. Hydraulic characteristics obtained with waters at 20° C at pump nominal speed.
Working tolerance is +/- 10%.
Hydraulic characteristics can change with liquids other than water at 20° C. Liquid temperature (with appropriate anti-freeze liquids) -20°C / +90°C
On request: Different Voltages – 60Hz version – Dual-frequency – Special fluids with temperatures up to 180°C
simaco-industry-C-draw2

                  USES AND APPLICATIONS

- Water treatment
- Water for human consumption
- Water for soft drink
- Osmosis - Water purification system
- Micro-filtration
- Demineralisation
- Water/Oil temperaturecontrollers
- Robotic for automation
- Mechanic Industry
- Chemical and pharmaceutical industry
- Increase of pressure
- Dish-washer
- Cups-washer
- Ironing in general